Thermo Scientific G100 Series Скачать руководство пользователя | Manualshive

Страница: 24 / 60

background image

General Operational Instructions

Warning and Error Codes

5-10

G100 Range CO

2

Analyser

Thermo Scientific

Once the reading memory is full it is not possible to store any more readings. When full and the
‘Store’ key is pressed or data logging is activated the instrument will show a brief message stating that
the memory is full and that no further data will be recorded.

1. From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.

2. Press ‘Key 4’ to view data.

3. To clear the readings press the soft-key ‘More’ followed by ‘Key 1 - Delete all’.

Diagnostics

The ‘Diagnostics’ option enables remote technical support to identify and resolve issues with the
instrument and readings. If required, the operator may be asked to confirm the diagnostics displayed.

1. From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.

2. Press ‘Key 5’ to view diagnostics.

Warning and Error Codes

When switched on the instrument will perform a predetermined self-test sequence taking
approximately 10 seconds. During this time many of the instrument’s working parameters and
settings are checked. If any operational parameters are out of specification or if the pre-programmed
recommended calibration/service date has passed, errors or warnings may be displayed.

Battery/Charging

The battery used in the instrument is 2 Ah Lithium-Ion cell. The instrument must be charged using
the power supply supplied with your instrument.

When plugged into the charger the instrument will power on and display charging. When complete
the display will change to show that the instrument is charged. To switch the instrument ON whilst
charging or charged is displayed the operator will need to switch the instrument off and then on
again.

When the instrument is already powered on, the operation is slightly different as the battery icon
changes to a flashing plug symbol. This will stop flashing when the charge is complete.

Note

For further information contact your equipment supplier.

Note

For further information please refer to section

“Problem Solving”

of

this manual.

Note

Although the instrument can be powered via the USB connector it cannot be

charged via USB.

Note

A full charge will take approximately

3 hours

. Typically, a fully charged battery will

last 8-10 hours.

«
...
22
23
24
25
26
...
»

Содержание G100 Series





























































Отзывы:

Нет отзывов

Похожие инструкции для G100 Series

Бренд: UEi Страницы: 4

Бренд: Hach Страницы: 145

Бренд: Hach Страницы: 358

Polymetron 9582sc

Бренд: Hach Страницы: 280

Бренд: HACH LANGE Страницы: 15

Бренд: P3 International Страницы: 1

Бренд: Cecomp Страницы: 4

DIRIS Digiware D-40

Бренд: socomec Страницы: 58

Бренд: Aqualytic Страницы: 140

2-WIRE EMM.630CT-MID

Бренд: Qonnex Страницы: 2

Бренд: Lutron Electronics Страницы: 43

Бренд: X-Rite Страницы: 130

FlowStar2 LB 514

Бренд: BERTHOLD TECHNOLOGIES Страницы: 130

Бренд: Megger Страницы: 8

Бренд: NIEUWKOOP Страницы: 2

WTW pH/ION 3310

Бренд: Xylem Страницы: 48

Бренд: Bante Instruments Страницы: 26

Бренд: az-instrument Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды