Thermo Scientific G100 Series, Руководство по эксплуатации

Страница: 9 / 60

Thermo Scientific G100 Range CO
2
Analyser
3-1
3
G100 Range Optional Products and Accessories
Optional Products
The G100 Analyser range has a number of optional products for purchase which enhance the usability
and enable further analysis of data and reading information.
G100 Range – Download Software (Optional)
The G100 Range – Download Software enables the user to maximise the operation of the incubator
analyser. Instrument readings and event log data may be downloaded to a PC for further analysis and
exported to other applications such as MS Excel. It enables direct communication with the unit,
features a simple download facility and is fully compatible with the latest Microsoft operating systems.
Event Log
The G100 instruments incorporate the facility to log significant events via the ‘Event Log’. This can be
used as an aid to monitoring the use of the instrument. It can also be used as a diagnostic tool if there
is a problem with the instrument.
The event log can only be viewed via the optional G100 Range - Download Software. It cannot be
viewed on the analyser screen. Applicable events are stored in the event log automatically. No user
intervention is required.
The event log can hold approximately 270 events. If the log becomes full then it begins to over-write
the older events. This can be identified by the index field which starts from event number 1. The log is
cleared when the instrument is reset.
Note For more information on the features listed in this section please contact (Your
company) on (Your telephone) or email (your email@your domain) .
Note
Please refer to section “Event Log” on page 12-1 of this operating manual for
further information.