Thermo Scientific dionex ic pure water, Руководство по эксплуатации

Страница: 17 / 128

Thermo Scientific Dionex IC Pure system |
7
Safety precautions | Chapter 2

To avoid tripping ensure that the tubings do not lay over the floor.

Apply the general rules of hygiene for laboratories when working with the system.

Do not use any oxidative cleaning agents for cleaning the unit. These can damage the unit.

Proceed as follows when the unit has a defect:

Switch the system off and unplug the unit from power outlet.

Shut off the supply of feedwater.

Contact your local service organization.

Wear safety gloves when working with chlorine granulate or with disinfectant solutions.

If your skin should come into contact with a chlorine product, immediately rinse it with
ample, fresh water.

The unit, or system components, may heat up as a result of a defect. It is recommended to
always wear appropriate safety gloves to prevent skin damage or burns.

Wear safety gloves when changing the UV-lamp, to prevent that your skin comes in contact
with the UV-lamp glass.

Wear safety goggles when working with chlorine granulate or with disinfectant solutions.

If your eyes come into contact with a chlorine product, immediately rinse them with ample,
fresh water and immediately contact a physician.

Check the UV-lamp before initial start.

If the UV-lamp is broken

Wear a breathing protector, filter category FFP3 and replace the UV-lamp. For
disposal of the UV-lamp, refer to “Waste disposal” on page 97.

Ventilate the room well.
Note
The Hg content in the UV-lamp is so low so that no damage to the environment can arise.!