Thermo Scientific DensityPRO, Инструкция по применению

Страница: 65 / 101

DensityPRO Specific Parameters
Parameter Type R/W Description
ALARM_STATUS_FLAGS_2
(cont).
ASF R Alarm and status flag set 2
Bit 9 - “Temp ADC error” Bit 25 - “#2 Totalizer locked”
Bit 10 - “Flow ADC error” Bit 26 - “#3 Totalizer locked”
Bit 11 - “Current output over max” Bit 27 - “#4 Totalizer locked”
Bit 12 - “NV Erase failed” Bit 28 - “HART POLL fault”
Bit 13 - “NV Checksum Error” Bit 29 - “Unused”
Bit 14 - “Totalizer locked” Bit 30 - “Unused”
Bit 15 - “Totalizer high rate” Bit 31 - “Unused”
ALARM_STATUS_FLAGS_3 ASF R Alarm and status flag set 3
Bit 0 - “HV Background Interpolator
Active” Bit 16 - “FB IF to device comm. error”
Bit 1 - “Unused” Bit 17 - “Unused”
Bit 2 - “Unused “ Bit 18 - “Unused”
Bit 3 - “Unused “ Bit 19 - “Unused”
Bit 4 - “Unused “ Bit 20 - “Unused”
Bit 5 - “A/D Converter Fault “ Bit 21 - “Unused”
Bit 6 - “Unused” Bit 22 - “Unused”
Bit 7 - “Bad XRAY Threshold” Bit 23 - “Unused”
Bit 8 - “MSG over run” Bit 24 - “Unused”
Bit 9 - “Gain not yet stable” Bit 25 - “Unused”
Bit 10 - “NV tot Fault” Bit 26 - “Unused”
Bit 11 - “Cal Pt Pending” Bit 27 - “Unused”
Bit 12 - “HV unstable” Bit 28 - “IOUT Hold”
Bit 13 - “FBUFFER overrun” Bit 29 - “IOUT Hold at min”
Bit 14 - “NV data changed” Bit 30 - “IOUT Hold at max”
Bit 15 - “Unused” Bit 31 - “IOUT Hold at other”
Thermo Fisher Scientific DensityPRO with F
OUNDATION
™ fieldbus Application Guide C-3