Thermo Scientific DensityPRO, Инструкция по применению

Страница: 28 / 101

The NI-FBUS Configurator
Configurator Basics
The preferred way to configure the device is to use menus and methods.
The NI-FBUS Configurator supports user menus.
Using Menus &
Methods
Access the menus by going to AI_TRANSDUCER > Root Menu .
Figure 3–8. The Root Menu
The table below lists the items contained within each menu.
Table 3–4. Root Menu items
Menu Level 1 Menu Level 2 Menu Level 3
1 Setup 1 Density Setup Density Setup
2 Time Constant Time constant setup
3 Temp. Compensation
Setup Temperature Comp. Setup
4 Other meas assign modify Other meas assign modify
5 View other measurement View other measurement
2 Standardization Standardization
3 Gauge Calibration GAUGE CALIBRATION
4 Alarm Alarm Setup
5 Actions 1 System Restart System Restart
2 Erase All Entries Erase All Entries
3 Clear All Alarms Clear All Alarms
4 Clear All Holds Clear All Holds
6 Diag/Service 1 Current Output Current output setup
2 Loop Test Loop test
3 Trim Analog Output Trim analog output
3-10 DensityPRO with F
OUNDATION
™ fieldbus Application Guide Thermo Fisher Scientific