Thermo Scientific DensityPRO, Инструкция по применению

Страница: 22 / 101

The NI-FBUS Configurator
Configurator Interface
5. Double-click on DensityPRO_XXXXXXXXX to view the device
properties. If the DensityPRO has been connected correctly, PD tag,
the device ID, and node address are shown. The PD tag is the physical
name of the device. The device ID is a unique device identifier.
Following is an example of a typical device ID:
5446530200_XXXXXXXXX
In this case,
544653 is the manufacturer ID
0200 is the device type
XXXXXXXXXXXX is the serial number
The node address is the device address. The PD tag and node address
can be changed using the configurator software or host system.
Configurator
Interface
Note Additional information on the NI-FBUS Configurator can be found
in the configurator user manual ( Help > User Manual ). If you are not
using this configurator, reference the documentation that came with your
host system.
▲
The main screen of the NI-FBUS Configurator is composed of the object
menu, the toolbar, and several windows. These are shown below.
Figure 3–3. Parts of the NI-FBUS Configurator main screen
3-4 DensityPRO with F
OUNDATION
™ fieldbus Application Guide Thermo Fisher Scientific