Thermo Scientific APEX 100, Руководство пользователя, Страница: 62 / 442

Page 62
Thermo Scientific APEX User’s Guide
Additional Parameters You May Want to Set Up
Listed below are additional parameters you may want to set up to get your particular
conveyor application running to your satisfaction.
Belt-Speed-Encoder Function
If your conveyor has a speed encoder, this function allows the conveyor speed
parameter to be set automatically. For more details, see page 124.
Bin-Full Notification
If your reject bin is monitored by a photo-eye, this function allows you to be notified (or
the conveyor stopped), when the reject bin is full. For more details, see page 217.
Reject-Confirm Function
If you have an additional photo eye to confirm that a reject has, indeed, occurred, this
function notifies you if the reject does not occur. For more details, see page 137.
Warnings, Alarms, and Faults (WAFs)
Many of the detectors functions provide a warning, alarm, or fault when a condition
needing your attention occurs. This menu—in conjunction with the appropriate
hardwired external device—allows this to happen. For more details, see page 214.
Quality Test
A Quality Test allows you to verify that the detector is working properly, especially when
testing products over long periods of time. The Quality Test is a manual, not an
automatic, test. For more details, see page 196.
AuditCheck
If the optional AuditCheck equipment is installed on your search head, the AuditCheck
function allows you to verify that the detector is working properly, especially when
testing products over long periods of time. The AuditCheck tests occur automatically,
while product is running, at time intervals you specify. For more details, see page 206.
Phase Tracking
The phase-tracking function allows the APEX to automatically adjust the product phase
for small variations in phase over long periods of time, especially when testing wet
products (where the phase angle is sensitive to product temperature). For more details,
see page 153.
Copying and Pasting Product Parameters
This function is particularly useful when you are testing multiple products. You can save
considerable amounts of time and effort using the copy and paste functions, because
you do not need to re-enter the product parameters for each product, re-run the
calibrations, and so on. For more details, see page 173.