Thermo Scientific APEX 100, Руководство пользователя, Страница: 187 / 442

Thermo Scientific APEX User’s Guide
Page 187
5) Press the Go button and a confirmation screen appears. (To see what a confirmation
screen looks like, see step 3 on page 185.)
6)
Press the left-navigation button to highlight the “Accept” check mark. (Refer to
step 4 on page 185.)
7)
Think very carefully! The next step cannot—repeat, cannot—be undone.
8)
If you are absolutely sure you want to reset the detector, press the Go button. The
detector resets virtually everything and returns you to the start-up Main Menu
screen, which now looks like this.
Oscilloscope
The oscilloscope function allows you to see every signal generated by the detector—from
the initial product/contaminant signals seen by the search head to the final signal
produced by the detector after the search-head signals have been clipped, filtered, and
analyzed for the presence of a metallic “fingerprint.” In this section, the path from the
search head to the final signal in the detector is known as the “signal path.”
Oscilloscope
Navigating to the Oscilloscope Function
1)
From the Main Menu navigate to the system and tools menu.
System and Tools
(continued…)