Thermo Scientific APEX 100, Руководство пользователя

Страница: 387 / 442

Thermo Scientific APEX User’s Guide
Page 387
IXR Tracking
The default value for IXR tracking is “On” and is a useful feature during long production
runs lasting many hours or several days. When IXR tracking is on, the detector tracks
small changes in the X and R signals that may occur because of small hourly or daily
temperature changes in your product or production environment. In addition please note
that, for tracking to work, there must be a gap between individual packages. The
minimum pack gap is 25 mm and the optimum pack gap is equal-to-or-greater-than half
of the width of the aperture of the search head.
To verify IXR tracking is on, do the following.
1)
Navigate to the IXR menu (as described in steps 1–4 in the “Enabling the IXR
Function” section on page 378).
IntelliTrack X R Menu
2)
Press the Go button and navigate to the “Enable IXR Tracking” menu.
Enable IXR Tracking
The default value for IXR tracking in “On,” as shown by the checkmark next to the
tracking icon in the above screen. If tracking is set to “Off” (as shown by an X next to
the icon), press the Go button and a checkmark appears.
3)
Press the Back button repeatedly to exit the menu and return to the Main Menu.