Thermo Scientific Agilent 1200 Series, Руководство по подключению

Страница: 15 / 58

1
Checking the Agilent Firmware Versions
Checking the Firmware Versions from the Xcalibur Data System
Thermo Scientific Agilent 1200 Series Getting Connected Guide for LC Devices 3
2. Choose Start > All Programs > Thermo Xcalibur > Xcalibur to open the Xcalibur
application.
3. From the Xcalibur Roadmap view, choose View > Info View to open the Information
view, and then click the Status tab.
4. On the Status page, click the module name to view its status ( Figure 3 ).
Figure 3. Status page of the Xcalibur Roadmap View (example)
Note To trigger data acquisition from a Thermo Scientific mass spectrometer, you
must install a contact closure board in one of the Agilent modules and connect the
board to the Start In pins on the mass spectrometer power panel. See
“Installing the
External Contact Interface Board” on page 29 and “Connecting the Contact Closure
Cable” on page 35 .