Thermo Scientific Accela UV/Vis Plus, Руководство по оборудованию

Страница: 23 / 86

1
Introduction
Status LEDs
Thermo Scientific Accela UV/Vis Detector Hardware Manual 7
Status LEDs
Table 1 describes the four LEDs on the front panel of the UV/Vis detector (see Figure 10 ).
Figure 10. Status LEDs for the UV/Vis detector
Specifications
Table 2 lists the specifications for the UV/Vis detector.
Table 1. Status LEDs and their meanings
LED State Meaning
Power Green The detector is on.
Comm Green Communication to the data system computer has been
established.
Amber There is no communication with the data system.
Run Green The detector is ready for a run.
Flashing green A run is in progress and the detector is sending data to the
data system computer.
Flashing Amber An error has occurred during a run.
Lamps Green One or both lamps are turned on.
Amber The lamps are off.
Power Comm Run Lamps
Table 2. UV/Vis detector specifications (Sheet 1 of 2)
Item Specification
Dimensions 18 × 36 × 47 cm ( h × w × d )
7.1 × 4.2 × 18.5 in. (
h × w × d
)
Weight 19.5 kg (43 lbs)
Power requirements 100/115 or 230 Vac; 50/60 Hz, 225 VA maximum
Operating temperature +10 to +40 °C
Storage temperature – 40 to +70 °C
Fuse size • For 100/115 Vac: T2.5 A (slo-blo)
• For 230 Vac: T1.25 A (slo-blo)
Operating humidity 5 to 95% non-condensing relative humidity