manualshive.com logo in svg

Thermo Scientific Accela UV/Vis Plus, Руководство по оборудованию

Поделиться
Скачать
Thermo Scientific Accela UV/Vis Plus Скачать руководство пользователя страница 2

© 2013 Thermo Fisher Scientific Inc. All rights reserved. 

Accela is a registered trademark and LightPipe is a trademark of Thermo Fisher Scientific Inc. in the United 
States. 

The following are trademarks in the United States and possibly other countries: PEEK is a trademark of Victrex 
PLC. Super Flangeless is a trademark of IDEX Health & Science, LLC. 

Upchurch Scientific is a registered trademark of IDEX Health & Science, LLC. Valco and Cheminert are 
registered trademarks of Valco Instruments Co. Inc. and VICI AG. 

All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the 
product operation. This document is copyright protected and any reproduction of the whole or any part of this 
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information in this 
document is for reference purposes only. System configurations and specifications in this document supersede 
all previous information received by the purchaser. 

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This 
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of 
Sale shall govern all conflicting information between the two documents.

Release history: Revision A, March 2010; Revision B, March 2011; Revision C, December 2013

This revision contains cosmetic changes only. The cosmetic changes include a new title page and chapter icon. 
In addition, the pagination might differ slightly from the last revision.

For Research Use Only. Not for use in diagnostic procedures.

Содержание Accela UV/Vis Plus























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды