1.
2.
ALARM
IDENT
Key to Symbols
5
HAAKE Phoenix II P1
Version 3.07
1.4 Symbols used on the display
ALARM
flashes and heater element, pump and if avail-
able, cooling circuit have been switched off. Any cause
of the alarm is displayed in a second line.
Appears
,
if heater is active and flashes during the control phase.
if cooling is active with full cooling capacity.
if cooling is active with partial cooling capacity.
Star 1 and 2 are blinking alternately when the cooling
is on.
The crossed out star is on when the cooling unit is off.
if ramp function is activated.
IDENT
flashes: After starting the control and after ente-
ring a new set temperature, the controller determines
suitable control parameters. It can happen that heating
or cooling is interrupted during this process and the dis-
played temperature changes. This is because the con-
trol unit requires some time to determine the parame-
ters.
For this function the identification has to be activated
(“Settings„ / “Control„ menu).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com