24
SYSTEM MANAGER
ENGLISH
Setting the room temperature setpoint
Turn the knob (14) to set the desired
room temperature
comfort setpoint .
Proceed in a similar way to set the
room temperature redu-
ced setpoint .
- Press the "
OK
" button (13).
- Select “Heating circuit 1”.
- Set the room temperature reduced setpoint.
b
After changing a setpoint, you need to wait about 2
hours for the new setting to have any effect on room
temperature.
b
If no room unit is installed, changing the room tempera-
ture setpoint simply shifts the heating curve.
- Press the central heating mode button (5) to select
"Automatic" (
b
).
- If the central heating system incorporates a room unit,
check that this is active and proceed as follows to use
the knob to set the room temperature setpoint (~20°C).
- Press the “
Presence
” button (
o
/
l
) to display the "
o
"
symbol.
- Press "
ESC
" to return to the main screen.
- If the system is made up of a number of different heat-
ing circuits, a room temperature setpoint must be set for
each of them.
The second circuit (optional) may be either direct or
mixed.
- Press the "
OK
" button.
- Select “Heating circuit 1-2-3” and press “
OK
”.
Set:
- the room temperature comfort setpoint
(parameters 710-1010-1310)
- the room temperature reduced setpoint
(parameters 712-1012-1312)
- the heating curve slope
(parameters 720-1020-1320).
Comfort setpoint
14
5
13
Comfort setpoint
