Thermia Calibra Cool, Руководство по установке

Страница: 13 / 44

When the heat pump is in position, remove the transport safety. (If the heat pump should be moved further, put back the transport
safety screw.) Make sure all parts of the transport safety is removed! (As the transport safety screw is located behind the passive cooling
heat exchanger on Calibra Cool, an extension tool will simplify the removal.)
▪
The heat pump should be placed on a stable floor with a floor well (so any condensation may drain from the condensation hole in
the bottom of the heat pump), preferably a concrete floor with floor drain.
▪
When placed on a wooden floor, the floor should be reinforced to hold the weight of the heat pump, including a filled water heater.
Consider that condensation water may drip from the drain hole, so take the necessary steps to protect the floor.
Installation Guide Calibra Cool
Thermia AB BWCC01IG0102
13