Thermia Calibra Cool, Руководство по установке

Страница: 5 / 44

1 About the document
1.1 About the document
This manual is a reduced version of the Installation guide and applies to installers with a prior experience in installing heat pumps. Indus-
trial standards and local regulations must always be followed.
Manuals with more extensive information and technical information can be found and downloaded here:
www.thermia.com under the tab Partner Login.
1.2 Important information
The instructions contain different warning symbols, which, together with text, indicate to the user that there are risks involved with ac-
tions to be taken.
The symbols are displayed to the left of the text and two different symbols are used to indicate the degree of danger:
Warning
Risk of personal injury!
Indicates a possible danger that can lead to fatal or serious injury if
necessary measures are not taken.
Caution
Risk of installation damage.
Indicates a possible hazard that can lead to item damage if necessary
measures are not taken.
1.3 Electrical connections
Caution
The electrical installation must be carried out using permanently rout-
ed cables and must follow applicable local and national regulations. It
must be possible to isolate the power supply using an all-pole circuit
breaker with a minimum contact gap of 3 mm.
1.4 Safty valve
Caution
Cold and hot water pipes and overflow pipes from safety valves must
be made of heat resistant and corrosion-resistant material, e.g. copper.
The safety valve overflow pipes must have an open connection to the
drain and visibly flow into this in a frost-free environment.
Installation Guide Calibra Cool
Thermia AB BWCC01IG0102
5