Thermia Calibra Cool, Руководство по установке

Страница: 14 / 44

4 Heating connections
4.1 Calibra Cool
85
85
86
85
1
113
91
12
13
80
81
87
11
10
75
1 Heat pump
10 Heating/Cooling system supply pipe
11 Heating/Cooling system return pipe
12 Cold water line
13 Hot water line
75 Mixer valve hot water, with exchange valve
80 Shut-off valve
81 Filling valve (Check for local regulations when installing filling valve)
85 Venting valve (hot water tank coil)
86 Safety valve (Max 3 bar, heat pump), recommended: 1,5 bar
87 Safety valve (9 bar, hot water)
91 Dirt strainer with shut-off valve, DN 25
113 Expansion vessel
Make sure that a free flow is always possible on the heating circuit. Very small water volumes or stop in the heating circuit may cause
operational disturbances.
Caution
As the water temperature becomes hot, a mixer valve must be instal-
led between the cold water and the hot water pipes to ensure a lower
domestic hot temperature. Consider local and national requirements.
Installation Guide Calibra Cool
BWCC01IG0102 Thermia AB
14