Thermal Arc ULTRA FLEX 350 Скачать руководство пользователя страница 50

STATEMENT OF WARRANTY

LIMITED WARRANTY: Thermal Arc

®

, Inc., A Thermadyne Company, warrants that its products will be free of defects in workmanship

or material. Should any failure to conform to this warranty appear within the time period applicable to the Thermal Arc products as stated

below, Thermal Arc shall, upon notification thereof and substantiation that the product has been stored, installed, operated, and

maintained in accordance with Thermal Arc’s specifications, instructions, recommendations and recognized standard industry practice,

and not subject to misuse, repair, neglect, alteration, or accident, correct such defects by suitable repair or replacement, at Thermal

Arc’s sole option, of any components or parts of the product determined by Thermal Arc to be defective.

THERMAL ARC MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF

ALL OTHERS, INCLUDING, BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

LIMITATION OF LIABILITY: Thermal Arc shall not under any circumstances be liable for special or consequential damages, such as,

but not limited to, damage or loss of purchased or replacement goods, or claims of customers of distributor (hereinafter “Purchaser”)

for service interruption. The remedies of the Purchaser set forth herein are exclusive and the liability of Thermal Arc with respect to any

contract, or anything done in connection therewith such as the performance or breach thereof, or from the manufacture, sale, delivery,

resale, or use of any goods covered by or furnished by Thermal Arc whether arising out of contract, negligence, strike tort, or under

any warranty, or otherwise, shall not, except as expressly provided herein, exceed the price of the goods upon which such liability is

based. No employee, agent, or representative of Thermal Arc is authorized to change this warranty in any way or grant any other

warranty.

PURCHASER’S RIGHTS UNDER THIS WARRANTY ARE VOID IF REPLACEMENT PARTS OR ACCESSORIES ARE USED WHICH

IN THERMAL ARC’S SOLE JUDGMENT MAY IMPAIR THE SAFETY OR PERFORMANCE OF ANY THERMAL ARC PRODUCT.

PURCHASER’S RIGHTS UNDER THIS WARRANTY ARE VOID IF THE PRODUCT IS SOLD TO PURCHASER BY

NON-AUTHORIZED PERSONS.

Except with regards to the products listed below, this warranty shall remain effective three (3) years from the date Thermal Arc’s

authorized distributor delivers the product to Purchaser, but in no event more than (4) years from the date Thermal Arc delivers the

product to the authorized distributor.

Shorter warranty periods apply to the products listed below. On these products, the warranty is effective for the time stated below

beginning on the date that the authorized distributor delivers the products to the Purchaser. Notwithstanding the foregoing, in no event

shall the warranty period extend more than the time stated plus one year from the date Thermal Arc delivered the product to the

authorized distributor.

ALL OTHER

P-WEE, PRO-LITE

POWER SUPPLIES

POWER SUPPLIES

PRO-PLUS, PRO-WAVE

LABOR

MAIN POWER MAGNETICS (STATIC & ROTATING)

3 YEARS

2 YEARS

1 YEAR

ORIGINAL MAIN POWER RECTIFIER

3 YEARS

2 YEARS

1 YEAR

CONTROL PC BOARD

3 YEARS

2 YEARS

1 YEAR

ALL OTHER CIRCUITS AND COMPONENTS INCLUDING

1 YEAR

1 YEAR

1 YEAR

BUT NOT LIMITED TO, CONTACTORS, RELAYS,

SOLENOID, PUMPS, POWER SWITCHING SEMI-CONDUCTORS

ENGINES: ENGINES ARE NOT WARRANTED BY THERMAL ARC, ALTHOUGH MOST ARE WARRANTED BY THE ENGINE

MANUFACTURER. SEE THE ENGINE MANUFACTURES WARRANTY FOR DETAILS

.

CONSOLES, CONTROL EQUIPMENT, HEAT

1 YEAR

1 YEAR

1 YEAR

EXCHANGES, AND ACCESSORY EQUIPMENT

TORCH AND LEADS

180 DAYS

180 DAYS

180 DAYS

REPAIR/REPLACEMENT PARTS

90 DAYS

90 DAYS

90 DAYS

Warranty repairs or replacement claims under this limited warranty must be submitted to Thermal Arc by an authorized Thermal Arc

®

repair

facility within thirty (30) days of the repair. No transportation costs of any kind will be paid under this warranty. Transportation charges to

send products to an authorized warranty repair facility shall be the responsibility of the customer. All returned goods shall be at the customer’s

risk and expense. This warranty supersedes all previous Thermal Arc warranties.

Thermal Arc

®

is a Registered Trademark of Thermadyne Industries Inc.

Thermal Arc Inc.

Effective January 4, 1999

Troy, Ohio 45373

830538

Содержание ULTRA FLEX 350



















































Отзывы: