Thermal Arc ULTRA FLEX 350, Руководство пользователя

Страница: 27 / 50

8. To strike an arc, depress the foot pedal, or use
the torch switch. Open circuit voltage will now be
present on the output of the power source. If a
capacitor discharge arc starter is being used, hold
the torch in close proximity to the workpiece while
pressing the foot pedal. The high voltage will jump
the gap to the workpiece and the arc will follow.
9 To end the weld, release the foot pedal, or turn
torch switch off. Turn off shielding gas supply.
Figure 5-3
430429-465
OPERATION
February 28, 2000 5-5