Thermal Arc POWERMASTER 400SP, Руководство по обслуживанию

Страница: 56 / 110

POWERMASTER 400SP, 500SP AUTOMATION
5-10 Octobe r 30, 2008
5.07 Configuration at Front Panel Menu
The INT06 can also be p r og r ammed at the f r ont panel in menu "Ext r as, Robot Inte r face". The eight analog
inputs can be enabled o r disabled. So it is not necessa r y to open the machine and set the DIP switches. If the r e
a r e not enough digital outputs available at the r obot cont r ol to select a welding p r og r am, it is possible to select
th r ee diffe r ent p r e-defined welding p r og r ams with only two digital outputs. Those welding p r og r ams can be
set at menu items "P r ogIn1" to "P r ogIn3". The selection of these welding p r og r ams is made ove r the digital
inputs 1 and 2 (pin 1 and 2).
Menu Item Pin No. Setting Description
On analog input is enabled (co rr esponds with DIP switch 1 set to “ON”) Opt01(AnalogIn1) 23
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 2 set to “ON”) Opt02(AnalogIn2) 24
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 3 set to “ON”) Opt03(AnalogIn3) 25
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 4 set to “ON”) Opt04(AnalogIn4) 26
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 5 set to “ON”) Opt05(AnalogIn5) 27
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 6 set to “ON”) Opt06(AnalogIn6) 28
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 7 set to “ON”) Opt07(AnalogIn7) 29
Off analog input is disabled
On analog input is enabled (co rr esponds with DIP switch 8 set to “ON”) Opt08(AnalogIn8) 30
Off analog input is disabled
On p r og r am selection is enabled (co rr esponds with DIP switch 9 set to “ON”) Opt09(P r ogSelect)
Off p r og r am selection is disabled
On ope r ating mode selection is enabled (co rr esponds with DIP switch 10 set to “ON”) Opt10(Ope r Mode)
Off ope r ating mode selection is disabled
On “ r obot mode” is active (co rr esponds with the signal “set exte r n”) Opt11(Setexte r n)
Off “manual hand mode” is active
On When using job selection (tipt r onic mode) it is possible du r ing the welding, to change enabled
pa r amete r s ove r the analog inputs. Fo r example du r ing the welding p r ocess the welding cu rr ent can
be alte r ed with the cont r ol voltage at the analog input 1 [Opt01(AnalogIn1) must be set to “ON”]
Opt12(Job+Analog)
Off No r mal tipt r onic mode, all welding pa r amete r s a r e sto r ed in the job and can’t be changed ove r the
analog inputs.
P r ogIn1 = P r og (0-99) Assignment of a welding p r og r am
welding p r og r am no. (0-99) set as p r og r am 1
P r ogIn2 = P r og (0-99) Assignment of a welding p r og r am
welding p r og r am no. (0-99) set as p r og r am 2
P r ogIn3 = P r og (0-99) Assignment of a welding p r og r am
welding p r og r am no. (0-99) set as p r og r am 3