Therma-Steem® Model 400
February 15, 2019
5
volume, the unit will not maintain pressure for extended periods of time, it will use too
much water and oversaturated the surface that you are cleaning.
SAFETY:
READ ALL INSTRUCTIONS BEFORE USING THE VAPOR CLEANING SYSTEM.
Under no circumstances shall Therma-Kleen or its agents be held
responsible for any injury or damage to people or property that may be
caused by failure to follow the instructions below or by improper use of
the equipment.
WARNING:
Your Therma-Steam unit is designed to be an entirely safe if used properly and
incorporates the latest and most state-of-the art safety features.
Paying Close Attention to your system and surroundings are necessary when your Vapor
Steam System is being used.
TO REDUC THE RISK OF ELECTRICAL SHOCK, FIRE OR PERSONAL INJURY, FOLLOW ALL THE
INSTRUCTIONS AND ALWAYS USE BASIC PRECAUTIONS, INCLUDING THE FOLLOWING:
1.
ALWAYS
- Check the machine, power & steam hose for damage prior to start-up. If
damage is detected, it must be repaired prior to use.
2.
CAUTION
- Before use check the electrical cord for damage, ware & tare, cuts or
abrasion.
a.
DO NOT
- use your machine with a damaged electrical cord.
3.
NEVER
- Plug the unit into an un-grounded electrical receptacle.
4.
CAUTION -
The Electrical Outlet must be a GFI (Ground Fault
Interrupt). If you are unsure the receptacle is grounded, contact a
certified electrician.
a.
CAUTION
- If the Power Outlet is damaged, have a certified electrician repair
the outlet.
