Therma-Steem® Model 400
February 15, 2019
10
10.
When the “ADD WATER” light blinks, the reservoir is empty. Remove the air vent
cap, refill the water reservoir if desired, and resume cleaning. Do not over fill. It is
important to immediately refill the reservoir tank, so the boiler does not run out of
water.
Shut Down
:
1.
Turn the “HEATER” and “MAIN” power switches to the “OFF” position
.
2.
Release steam from the boiler by depressing the trigger on the gun.
3.
Close the steam knob.
4.
Once the system has cooled down and the water has been drained/removed, clean
the machine and Store carefully.
5.
Store the unit is a warm dry location.
6.
NEVER store the unit in a freezing environment. Frozen water will destroy the unit.
7.
NEVER ship or transport the unit unless all the water has been completely drained
from the system.
B
C
D
A
F
G
H
I
J
L
K
M
E
