background image

 

Therma-Steem® Model 400 

                   

February 15, 2019 

26 

 

LIMITED WARRANTY:

 

THERMA-KLEEN®, as manufacturer, warrants to the original purchaser, each new machine 
for a period of one year from date of shipment from the factory, to be free from defects 

in material and workmanship under normal use and service.  “Normal use and service” 

means not in excess of recommended maximum pressures, temperatures, incorrect fuels, 
or handling fluids not compatible with component materials, as noted in THERMA-
KLEEN®, manuals.  This warranty shall not apply to any machine or component which has 
been repaired or altered to adversely affect the performance or reliability of this product.  
The heating element on the THERMA-STEEM® models will not be covered if distilled 
water is not used or scale is present.  The boiler has a lifetime warranty. 

Neither this warranty nor any implied warranty applies to damage or harm caused by any 
or all of the following:  

1.

 

Freight damage;  

2.

 

Freezing damage;  

3.

 

Damage caused by parts and/or accessories or components not obtained from or 
approved by THERMA-KLEEN®,   

4.

 

Consequential or incidental damages arising from the use of a THERMA-KLEEN®;  

5.

 

Damage due to misapplication or misuse.   

Pump valves and bearings on the Ultra models are not warrantied if they are broken.   
The liability of THERMA-KLEEN® under the forgoing warranty is limited to repair or 
replacement of a defective component or part at THERMA-

KLEEN®’s option.  The 

defective component will be returned to the original manufacturer for judgment as to 
whether the component failed under normal operating conditions and therefore replaced 
or misused.  These parts must be returned to the regional office or manufacturing facility 
within the warranty period, at the sole expense of the purchaser.  This warranty is limited 
to furnishing the parts for replacement exclusive of installation labor.  The liability of 
THERMA-KLEEN®, Inc. under any theory of recovery (except any express warranty where 
the remedy is set forth in the above paragraph) for loss, harm or damage, shall be limited 
to the lesser of the actual loss, harm, damage, or the purchase price of the involved 
machine.  

THERMA-KLEEN®, expressly warrants its machines as above stated.  There are no other 
express warranties.  Any implied warranties, including warranty of merchantability or of 
fitness for a particular purpose or merchantability when this product is put to an 
industrial, commercial or rental use.  Before using any product, customer shall determine 

Содержание Therma-Steem 400




























Отзывы: