Themis RES-XR4-1U, Руководство по установке

Страница: 91 / 198

2-23
Themis Computer
2—Installation and Operation
Power Supply
2.2.2 Removing a Power Supply
Perform the following steps to remove a power supply:
1. Remove each AC power cord by cutting the cable tie wrap securing it to the
Power Cord Retention Bracket (see
A , Figure 2-18 ).
2. Loosen the two captive screws holding the Power Cord Retention Bracket to
the chassis (see
B , Figure 2-19 on page 2-24).
Figure 2-18.
Remove each Power Cord from the RES-XR4-1U rear chassis
Tie Wrap
C u t and remove the cable tie wrap sec u ring each AC power cord
A
to the Power Cord Retention Bracket.
Power Cord Retention Bracket