Themis RES-XR4-1U, Руководство по установке

Страница: 58 / 198

1-24
Themis Computer
RES-XR4-1U Installation Manual Version 1.5
The WPCM450R Controller interfaces with the host system via PCI connections to
communicate with the graphics cores. It supports USB 2.0 and 1.1 for remote key-
board/mouse/virtual media emulation. It also provides LPC interface support to con-
trol Super IO functions. The WPCM450R Controller is connected to the network via
an external Ethernet PHY module or shared NCSI connections.
The WPCM450R communicates with onboard components via six SMBus inter-
faces, PECI (Platform Environment Control Interface) buses, and General Purpose
I/O ports.
1.7.8.1 WPCM450R DDR2 Memory Interface
The WPCM450R supports a 16-bit DDR2 memory module with a speed of up to 220
MHz. For best signal integrity, the WPCM provides point-to-point connection.
1.7.8.2 WPCM450R PCI System Interface
The WPCM450R provides 32-bit, 33 MHz 3.3V PCI interface, which is compliant
with the PCI Local Bus Specification Rev. 2.3. The PCI system interface connects to
the onboard PCI Bridge used by the graphics controller.
1.7.8.3 Other Features of the WPCM450 BMC Controller
The WPCM450R supports the following features:
• IPMI 2.0
• Serial over LAN
• KVM over LAN
• LAN Alerting-SNMP Trap
• Event Log
• X-Bus parallel interface for I/O expansion
• Multiple ADC inputs, Analog and Digital Video outputs
• SPI Flash Host BIOS and firmware bootstrap program supported
• Reduced Media Independent Interface (RMII)
• Operating System independent
• Remote hardware health monitoring via IPMI
• Provides Network Management Security via remote access/console redirection
• supports the following management tools: IPMIView, CLI (Command Line