Themis RES-22XR3, Руководство по установке

Страница: 95 / 162

3-25
Themis Computer
3—BIOS Setup Utility
Advanced Setup Configurations
TPM Deactivated
Select Set to activate a TPM device at bootup. Select Clear to deactivate a TPM
device. The options are Set, Clear and
Don’t Change (default).
TPM Owner
Select Enable Install to set up a TPM ownership. Select Clear to void a TPM owner-
ship. Select Disable Install to disable TPM ownership setup support. The options are
Don’t Change (default), Enable Install, Disable Install and Clear.
Execute TPM Command
Select Enabled to allow the user to change executable TPM commands and TPM set-
tings. Select Don’t Change to keep the current TPM settings. The options are
Don’t
Change (default), Enabled, and Disabled.
TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.
3.3.11 IPMI Configuration
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
IT administrators can use to monitor system health and to manage the system as a
whole from a remote site. For more information on the IPMI specifications, please
visit Intel's website at
www.intel.com .
3.3.11.1 IPMI Firmware Revision
This item displays the current IPMI firmware revision.
3.3.11.2 Status of BMC
Baseboard Management Controller (BMC) manages the interface between system
management software and platform hardware. This is an informational feature which
returns the status code of the BMC micro controller.