Themis RES-22XR3, Руководство по установке

Страница: 80 / 162

3-10
Themis Computer
RES-22XR3 Installation Manual - Configuration 1 Version 1.3
3.3.2.17 C3 Auto Demotion
When enabled, the CPU will conditionally demote C6 or C7 requests to C3 based on
un-core auto-demote information. The options are Disabled and
Enabled (default).
3.3.2.18 ACPI T State
Select Enabled to report Processor throttling in the ACPI. The options are Disabled
(default) and Enabled.
3.3.3 Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:
CPU Bridge Configuration
3.3.3.1 QPI Links Speed
This feature selects the QPI data transfer speeds and enables/disables QPI Frequency
selection. If Slow-mode is selected, QPI Frequency will remain slow (safe mode),
and cannot be selected by the user. If Full-speed is selected, the following item will
be available for the user to select the QPI frequency. The options are Slow-Mode,
and
Full-Speed (default).
3.3.3.2 QPI Frequency (Available when QPI Links Speed is set to Full-
Speed)
This selects the desired QPI frequency. The options are Auto (default), 4.800 GT,
5.866GT, 6.400 GT.
3.3.3.3 QPI L0s and L1
This enables the QPI power state to low power. L0s and L1 are automatically
selected by the motherboard. The options are
Disabled (default) and Enabled.
3.3.3.4 Memory Frequency
This feature forces a DDR3 to run at a frequency other than what the system has
detected. Select Force SPD (Serial Presence Detect) to force the memory to run at a
frequency based on the SPD Standard (Table). The available options are
Auto
(default), Force DDR-800, Force DDR-1066, Force DDR-1333, and Force SPD.