Themis RES-22XR3, Руководство по установке

Страница: 89 / 162

3-19
Themis Computer
3—BIOS Setup Utility
Advanced Setup Configurations
3.3.6.2 Serial Port 2 Attribute
This feature allows the user to set COM 2 as a normal serial port or a virtual COM
port used for SOL (Serial Over LAN). The options are
SOL (default), and COM.
3.3.7 Remote Access Configuration
3.3.7.1 Remote Access
This allows the user to enable the Remote Access feature. The options are Disabled
and
Enabled (default).
If Remote Access is set to Enabled, the following items will display:
3.3.7.2 Serial Port Number
This feature allows the user decide which serial port to be used for Console Redirec-
tion. The options are COM 1
and COM 2 (default).
Base Address, IRQ
This item displays the based address and IRQ of the serial port specified above. The
default setting for COM 1 is
3F8/IRQ4 (default), and for COM 2 is 2F8/IRQ3
(default).
3.3.7.3 Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection. The
options are
115200 8, n 1 (default); 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and
9600 8, n, 1.
3.3.7.4 Flow Control
This feature allows the user to set the flow control for Console Redirection. The
options are
None (default), Hardware, and Software.
3.3.7.5 Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power-On Self-Test (POST).
Select Always to keep Console Redirection active all the time after POST.