Thelin providence, Руководство пользователя

Страница: 16 / 41

PROVIDENCE INSERT PELLET STOVE
16
D. Steps for complete built-in installation are as follows:
1. Build hearth base with non-combustible hearth pad and secure to subfloor. Base should exten t 6”
in front and 6” to the sides of stove.
2. Allow for the finished front material (i.e., tile, stone, slate) so that when the Providence is
inserted into cavity, the front of the stove is flush with the finished material.
3. Install wall thimble with outside air hook-up into wall or chase if applicable (see Figures 5 & 6).
Outside air is only required on mobile home installations.
4. Attach outside air flex pipe to left side of insert and exhaust vent pipe to pipe adaptor (see
Figures 5 & 6). Outside Air
– Aluminum Flex – Must use 3” if over 10’ vertical .
5. Slide Providence engine into the cavity until the engine front is flush with hearth face.
6. Install screws into front feet of stove engine to secure it to the floor.
FIGURE 5 – VERTICAL BUILT-IN VENTING