3
SAFETY PRECAUTIONS
Various symbols are used throughout this instruction manual and on the product to prevent physical
harm to you or other people and damage to property.
The symbols and their meanings are explained below.
Warning
Possible risk of injury or damage to equipment
Danger
This symbol indicates the risk of electric shock or fire danger that could
result in injury or damage to equipment.
This equipment has been checked and meets the requirements of general safety for electronic
devices. These requirements are specified to provide a reasonable protection against
electromagnetic interferences when the equipment is used in commercial environments.
This equipment generates, uses and can emit waves of radio frequency, and if not properly used
following the instructions of this manual can produce interferences in radio communications. The use
of this equipment in residential areas can produce interference, the user will be the only responsible
of correcting them.
CAUTION:
Though the light generated by LED does not produce any heat, for what his use turns out
to be very comfortable for the actors, the lamp head acts as a heat sink through its back part.
Surface can reach a temperature between the 50 ºC and the 80 ºC. Please use protective gloves if
you touch the lamp head at the heat sink.
Danger
Do not attempt to open any of the device or component housings. To
reduce the risk of electric shock, do not remove lamp head or Control
Unit cover. No user-serviceable parts inside. Maintenance and repair
work to be carried out only by THELIGHT Service Centre.
Do not cover the aluminium lamp head heat sink while using it. Proper
ventilation must be provided. Avoid exposing the lamp head to the heat
radiation of other light fixtures.
The lamp head is equipped with high power LEDs. Due to their high light-
output intensity don’t stare directly into the light source.
The V-lock mount or the XLR4 receptacle can be used for powering the 4LIGHT by battery.
Warning
Relevant information on Battery use
Use only original chargers. Don’t short the battery. Respect the service
and the safety manual of the battery.
To ensure maximum performance of the 4LIGHT equipment use only
high-load capacity batteries with a high continuous draw meaning a
Discharge Current of at least 9A.