12
Disconnecting the extension cable
Grab the connector firmly, turn the ring to unlock it and pull to extract it.
NOTE:
The lamp heads can operate with a maximum extension cable length of 10 meters.
NOTE:
The extension cable is provided with two equal connectors in every end: both can be
connected either in the VDC Control Unit or in the lamp head.
NOTE:
The 4LIGHT lamp head can be battery powered with the VDC Control Unit included in
the kit or mains powered with the optional VAC Control Unit.
4.
Placing the VDC Control Unit in the stand mast
You can place the VDC Control Unit in the stand mast for a handy use close to the lamp head.
To do so you will need to use a regular Super Clamp (not included in the 4LIGHT kit) and insert
the Hexagonal 5/8” (16mm ) baby spud.
Once installed the hexagonal spud just
slide the holder located at the VDC
Control Unit bottom over the spud plate
until properly seated, as shown in the
picture.
5.
Security cables
The lamp head is provided with
several holes specially design to
insert one o more 5mm snaps and
their safety cable.
Warning
When the lamp head and any other component is mounted in a
hanging position it must be secured with a safety cable rated at a
minimum of ten times the weight of the light fixture including its
accessories.