10
4.
PLACING INTO OPERATION
1.
Quick link swivel ball head mounting
Align the swivel ball head plate to the four
rivets located at the back of the lamp
head as shown in the picture.
Warning
On mounting the lamp head on any type of support, tripod or ceiling
grid make sure the swivel ball head handle is facing down towards
the ground.
Slide the swivel ball head plate until the
four shoulder rivets drop into the
receptacle. The locking pin will snap into
place when the plate is properly seated.
Warning
Make sure the locking pin has totally entered in his housing before
proceeding to use the light fixture.
The standard swivel ball head comes with a 3/8" pin to be clamped into a grip head and allows
the lamp head to be oriented and locked in a broad range of angles.
Removing the quick link swivel ball head
Pull up on the locking pin and slide the swivel ball head plate until the four rivets get free. Extract
the swivel ball head by pulling it upwards.