Thecus N2520 series, Руководство пользователя

Страница: 78 / 130

72
Chapter 3: System Administration
SSH 3.6.9
The device is now SSH protocol supported. It allows user to use SSH and have console to manipulate
as needed. The SSH default login user name is “root” with full privilege and password is admin’s pass-
needed. The SSH default login user name is “root” with full privilege and password is admin’s pass- “root” with full privilege and password is admin’s pass- root” with full privilege and password is admin’s pass- ” with full privilege and password is admin’s pass- with full privilege and password is admin’s pass- privilege and password is admin’s pass- and password is admin’s pass- password is admin’s pass- is admin’s pass- ’s pass- s pass- pass-
word. The default admin password is “admin” so once the admin password has changed then SSH
login need to change the password too.
A description for each item as following:
SSH
Item Description
SSH Service Enable or disable SSH service.
Port The port number is default 22.
SFTP Enable or disable SFTP protocol under SSH service.
Apply Click “Apply” to confirm the changes.
DDNS 3.6.10
To set up a server on the Internet and enable the users to connect to it easily, a fixed and easy-to
remember host name is often required. However, if the ISP provides only dynamic IP address, the IP
address of the server will change from time to time and is difficult to recall. You can enable the DDNS
service to solve the problem.
After enabling the DDNS service of the NAS, whenever the NAS restarts or the IP address is changed,
the NAS will notify the DDNS provider immediately to record the new IP address. When the user tries
to connect to the NAS by the host name, the DDNS will transfer the recorded IP address to the user.
The NAS supports the DDNS providers:
DyDNS.org(Dynamic DNS),DyDNS.org(Custom DNS),DyDNS.org(Static DNS),
www.zoneedit.com,www.no-ip.com .