3
1
2
3
1
2
3
6. Description and settings
removable,
lockable (internal)
button
bezel frame
lens
max. 3 potentiometers (LUX, TIME,
MODE)
Setting options via potentiometer
Setting the brightness (LUX)
You can set different brightness values with the brightness
potentiometer (factory setting 500 lx).
Set potentiometer to desired switch-on brightness
(5 – 1000 lux/on).
On the
on
setting the detector always responds to move-
ment, regardless of the brightness.
Turn the potentiometer to
Teach-in
; after 20 s (red LED
fl ashes) the detector saves the current surrounding bright-
ness as the new switch-on brightness.
!
Teach-in at 2-wire motion detector
(theMura S180-100
2W)
Set the time delay at the staircase light timer switch to
minimum.
Set the potentiometer to
teach-in
.
▻
The detector saves the current surrounding bright-
ness after 75 s (red LED fl ickers) as the new switch-on
brightness.
Set the desired time delay at the staircase lighting timer
switch.
Setting the time delay (TIME)
If the detector detects no further movement, it switches off
after the set time delay. If you want to change the preset time
(factory setting 10 min)
Set the potentiometer to the desired time (10 s, 1 min,
5 min, 10 min, 30 min).
If you wish to use the pulse function (e.g. for a staircase light
timer switch)
Set the potentiometer to . As long as motion is detected,
the contact closes every 10 s for 0.5 s.
L
At the 2-wire motion detector (theMura S180-100 2W), no
time delay can be set. The time delay set on the staircase
lighting timer switch applies. The time delay of the stair-
case light timer switch is restarted at regular intervals in
case of motion or when the light falls below the bright-
ness setpoint.
Test detection area (walking test)
The walking test is used to test the detection area and to
restrict it if necessary.
Set the time potentiometer (TIME) to
test
▻
The detector always responds to movements (regard-
less of brightness and confi guration type).
▻
After the detector has detected a movement, all con-
tacts switch on for 2 s.
L
At the 2-wire motion detector (theMura S180-100 2W),
the contact does not switch during the detected motion.
▻
If motion is detected the red LED on the master lights
up.
Performing the walking test using the button (only for slave
devices)
Press the button for 10 s
▻
If motion is detected the red LED on the slave lights up.
▻
Test mode is activated for 10 min.
Briefl y press the button
▻
The test mode is ended and the detector returns to
normal operation.
