4
Recommended guide values
Transit zones (not work areas)
approx. 5 min
School rooms, basements
approx. 10 min
Work areas (offi ce, etc.), toilets
approx. 10 min
Setting the MODE (fully or semi-automatic) with
staircase light function
Staircase light function – corridor off/corridor on
With the
corridor off
staircase light function the light can be
switched on and off manually using the button at any time.
With
corridor on
it can be switched on manually but not swit-
ched off. The light will not be switched off again until after
the set time delay.
Configuration type – auto/man
auto
= fully automatic
The lighting is switched on and off automatically (based on
presence, absence and brightness)
man
= semi-automatic
The lighting is always switched on manually. It is switched off
by the detector.
7. Manual operation using the button
(internal or external)
The button can be used to manually switch the lighting at any
time. The response varies depending on the detector type.
Switching on manually
> 30 s
< 30 s
< 2 s
< 2 s
t
t
t
> 30 s + eingestellte
Nachlaufzeit
2 min 30 s
theMura S180-100
> 30 min
> 30 s
< 30 s
< 2 s
< 2 s
< 2 s
t
t
t
30 s + eingestellte
Nachlaufzeit
> 30 s + eingestellte
Nachlaufzeit
Helligkeitsüberprüfung
nach 30 min
theMura S180-101
When the button is pressed briefl y, the light switches on for a
certain time (depending on the duration of motion and the set
time delay).
L
With theMura S180-101, the surrounding brightness is
checked after 30 min. If there is suffi cient brightness, the
light is switched off despite the presence of persons.
Switching off manually
2 min 30 s
> 30 s
< 30 s
< 2 s
< 2 s
t
t
t
Normalbetrieb
Normalbetrieb
> 30 s + eingestellte
Nachlaufzeit
theMura S180-100
> 30 s
< 30 s
< 2 s
< 2 s
t
t
t
30 s + eingestellte
Nachlaufzeit,
max. 2 min
Normalbetrieb
Normalbetrieb
> 30 s + eingestellte
Nachlaufzeit
theMura S180-101
If the light is switched on, it can be switched off for a certain
time by briefl y pressing the button (depending on the dura-
tion of the motion and the set time delay). Afterwards, the
detector returns to normal operation.
L
In the case of the 2-wire motion detector, when the button
is pressed only a short pulse is sent to the staircase light
timer switch.
integrated button
activated
integrated button
deactivated
8. Parameters and control commands via
remote control
L
Only with presence detectors (2060755)
The following parameters can be checked or changed via
the remote control for support during start-up as well as
servicing:
Parameter
theSenda B/
app check
Can be
changed by
theSenda B/
app
Can be
changed by
theSenda P
Brightness setpoint
value A
X
X
X
Brightness actual
value A
X
