5
Parameter
theSenda B/
app check
Can be
changed by
theSenda B/
app
Can be
changed by
theSenda P
Room correction factor
A
X
X
Brightness measure-
ment value A
X
Detection sensitivity
X
X
X
Time delay A
X
X
Short presence A
X
Channel function H
X
Time delay H
X
X
Switch-on delay H
X
Confi guration type
X
X
Staircase light function
X
Orientation light time
delay
X
Orientation light
brightness
X
Extended function
duration
X
Acoustic sensor
sensitivity
X
LED display motion
X
L
The parameters are sent to the detector by infrared. Chan-
ged parameters are applied and used.
To check the parameters
press the button and follow the instructions in the app.
The following control commands can be triggered with the
remote control:
Control command
Can be triggered
by theSenda B/
app
Can be triggered
by theSenda P
Can be triggered
by theSenda S
Teach-in channel A
X
X
Switching light
X
X
X
Test detection area
X
X
Restart
X
X
Factory settings
X
Connecting a mobile end device to theSenda B/
app remote control
Open the theSenda Plug app
Press the Bluetooth symbol in the app on the top left-hand
side
Briefl y press the Bluetooth button on theSenda B
▻ LED fl ashes red, devices are searched for
Confi rm with OK
▻
LED lights up red
9. Parameters and control commands via
app
1. Parameters
Brightness setpoint value A
theSenda B/app
theSenda P
Brightness actual value A
Check of the current measured actual brightness value.
Follow the instructions in the app.
Room correction factor A
The room correction factor is a measurement for the diffe-
rence of the brightness measurement at the wall and the
fl oor. The brightness measurement value at the wall is infl u-
enced by the installation location, incidence of light, position
of the sun, weather conditions, the refl ection properties of the
room, and the furniture.
With the room correction factor, the brightness measurement
value of lighting channel A is adjusted to the conditions in
the room. The standard value is 0.3 and is suitable for most
applications. Changes are only sensible in strongly deviating
situations.
Brightness measurement value A
When the actual brightness measurement is sent to the
detector, the room correction factor is recalculated.
