Theben 2060650, Руководство пользователя

Страница: 10 / 11

10
10. Troubleshooting
Fault Cause
Light does not switch
on or off if presence
is detected and in
darkness
Lux value is set too low; detector set to semi-
automatic; light was switched off manually via
button or remote control; person not within detec-
tion area; obstruction(s) interrupting detection;
time delay set too short
Light stays on with
detection of presence
despite sufficient
brightness
Lux value is set too high; light was briefly switched
on manually via button or with the remote control
(wait 30 min.); detector is in test mode
Light does not switch
off, or light switches on
spontaneously when
no one is present
Thermal sources of interference in the detection
area: fan heaters, incandescent lamps/halogen
spotlights, moving objects (e.g. curtains hanging in
open windows);
load (EBs, relays) not cleared
Button does not work Device still in the start-up phase; illuminated
button was used without neutral conductor;
push button not fed to the master
Light cannot be
switched off with the
button
Button is not connected to the detector. Check the
button wiring.
Device does not
respond
Short circuit or several phases in parallel swit-
ching! Disconnect detector from the power supply
for 5 min (thermal fuse)
Error flashing
(4 x per second)
Error in self-test;
device not functional!
11. Technical data
Operating voltage: 230 V AC, + 10%/– 15%
Frequency: 50/60 Hz
Standby output: 0.4 W +/– 15% (without orientation light)
Switching load:
L/L‘: 10 A with cos
ϕ
= 1; H1/H2: 2 A with
cos
ϕ
= 1 (only 2060755),
2 2060760 do not switch any load
Minimum load: 10 mA
Contact type A: µ contact
Switching capacity A:
Incandescent/halogen
lamp load:
Compact/fluorescent
lamps:
LED lamps:
2 2 2060750, 2 2060755:
2300 W
2 2 2060750, 2 2060755:
1150 VA
2 2 2060750, 2 2060755:
< 2 W: type. 40 W
> 2 W: type. 450 W
2 2060760: –
2 2060770: *
Switching capacity H: 50 W/50 VA (max. 2 A) (2 2060755)
Contact type H: µ contact
Protection rating: IP 20 in accordance with EN 60529
Protection class: II in accordance with EN 60598-1
Operating temperature: –15 °C … +45 °C
Brightness setting range: – 2 2 2060750: 5 – 1000 lx
– 2 2060755: 5 – 3000 lx
– 2 2060760: –
– 2 2060770: 5 – 1000 lx
Presence time delay: 10 s – 120 min (2 2060755)
Lighting time delay: – 2 2 2060750: 10 s (pulse)
– 40 min
– 2 2060755: 10 s (pulse)
– 60 min/pulse
– 2 2060760: –
– 2 2060770: pulse
In the case of switching with 2060670 and
2060770 the turn-on time corresponds to the
time set on the staircase light timer switch.
Presence switch-on
delay:
0 s – 10 min (2 2060755)
Installation height 0.8 – 1.2 m
Detection angle: 170°
Detection area:
– across
– frontal
14 x 17 m
12 x 10 m
Software: Class A
Energy efficiency class: A+
* only for staircase light timer switch control
Cleaning and service
†
Only use a dry, soft cloth to clean the device surface.
†
Do not use any cleaning agents or solvents.
Disposal
†
Dispose of device in environmentally sound manner
(electronic waste)
12. Dimensional drawings
theMura S180-100 UP (2060750)
37.00
68.00
theMura S180-100 UP WH (2060650) + theMura S180-101 UP WH (2060655)
56.50
53.75
85.00 85.00
85.00 68.00
45.00
45.00
theMura S180-101 B UP (2060755)
85.00 85.00
68.00
50.00
theMura S180 Slave UP WH (2060660) + theMura S180-100 2W UP WH (2060670)
45.00
45.00
theMura S180 Slave B UP (2060760)
68.00
32.00
50.00
theMura S180-100 2W B UP (2060770)
theMura S180-100 UP N WH (2060653)
70.80
85.00
56.50
53.75
85.00
85.00
45.00
45.00