The 37Company Fluido Compact, Руководство пользователя и техническое руководство

Страница: 30 / 52

User Manual / Technical Manual - Maintenance
30 of 49
6 Maintenance
For the device, several spare parts are available (see
Repair
on page 32). The heating element
of the warming module cannot be changed.
If you contact the hospital service department or the local supplier for technical support, make
sure that you have the serial number and MOD record of the warming module or control module
depending on which device support is needed.
You can find the serial number of the control module on the back, just above the universal clamp.
The serial number of the warming module is on the slider.
If the device gives a 'repair required' indication (see
Indicator LED behaviour
on page 17),
contact your local distributor.
Warning!
The device should be tested at least once a year, see
Test the device
on page 40.
The essential performance of the device is to warm fluids within the safe temperature and
time limits according to ASTM F2172-2. Testing is required to validate if the device still
complies with its essential performance.
6.1 Cleaning
6.1.1 General cleaning procedure
Warning!
Before you clean the device, disconnect the power supply cord.
Caution!
• Do not use dripping wet cloths.
• Do not use ketones (MEK, acetone, etc) or abrasive cleaners.
• Do not use steam sterilization (autoclave), EO sterilization or dry heat to sterilize the
device.
• Make sure that water cannot come in the electrical areas of the device.
• Clean the device from too much detergent or disinfectant.
• Let the device air dry.
• To clean the outer surface of the device, use a soft cloth lightly dampened with a
solution of hand warm water and a mild detergent or a non-staining hospital disinfectant.
• Use one of the following cleaning solutions:
• 90% (or 70%) isopropyl alcohol
• mild detergent solution