The 37Company Fluido Compact, Руководство пользователя и техническое руководство

Страница: 24 / 52

User Manual / Technical Manual - Operation
24 of 49
5.2.1 Turn the device on
1.
Connect the power supply cord to the socket.
The standby/on indicator LED on the control module is now
orange.
2.
Push the standby/on button (A).
• You will hear a single beep.
• The indicator LEDs on the control module flash one time.
• The standby/on indicator LED stays green.
• The status indicator LED on the warming module is now
orange.
5.2.2 Install the disposable set
1.
Unpack and inspect the disposable set.
2.
Connect the hospital administration set (A) to the cassette
of the disposable set (B).
3.
Take the warming module out of the warming module
holder.
4.
Open the slider (C) of the warming module.
5.
Put the cassette of the disposable set (D) in the warming
module. The cassette fits in only one way.
6.
Close the slider.
The status indicator LED on the warming module is now
green, to indicate that the disposable set is detected and
positioned correctly.
When the status indicator LED on the warming
module stays orange the detection of the
disposable set failed.
• Remove the set (see
Stop the device
on page
27).
• Check the heating surface for damages and
contamination.
• Check the cassette of the disposable set for
damages and contamination.
• Prime the disposable set (see
Prime the
standard set
on page 25).
• Install the disposable set again.
• Wait until the set point indicator LED on the
control module stays green.
7.
The set point indicator LED flashes green until the required
temperature is reached.