The 37Company Fluido Compact, Руководство пользователя и техническое руководство

Страница: 27 / 52

User Manual / Technical Manual - Operation
27 of 49
If fluid leakage is observed, stop the fluid flow, and open the slider to disengage the device
from operating.
5.3 Operate the device
Before you operate the device, prepare the device (refer to
Preparation before operation
on page
23).
1.
Put the warming module near the patient.
Warning!
• Do not position the warming module close to the
head of the patient if inhaler therapy is used.
• Only use a syringe at an injection point (A) at the
end of the patient line.
The position of the warming module depends on
the position of the IV catheter.
2.
Connect the patient line (B) to the IV catheter.
3.
Open the roller clamp (C).
5.4 Stop the device
1.
Push the standby/on button (A).
The status indicator LED of the warming module
is now orange.