The 37Company Fluido Compact, Руководство пользователя и техническое руководство

Страница: 31 / 52

User Manual / Technical Manual - Maintenance
31 of 49
• diluted chlorine bleach (30 ml/l water)
• ammonia based cleaners
• glutaraldehyde-based cleaners 2.4%
• hydrogen peroxide 3%
6.1.2 Cleaning of the warming module
Caution!
To clean the warming module:
• Use solutions with less than 2.4% glutaraldehyde.
• Obey the manufacturer's recommendations, see
General cleaning procedure
on page
30.
Caution!
Make sure that you do not damage the interface of the warming module. If the interface is
wet, still dirty or damaged, do not use the device and replace the warming module.
6.1.3 Cleaning of the control module
Caution!
To clean the control module:
• Use solutions with less than 2.4% glutaraldehyde.
• Obey the manufacturer's recommendations, see
General cleaning procedure
on page
30.
Caution!
• Make sure that fluids cannot come in the control module.
• Make sure that the control module is dry before you use it again.
6.1.4 After cleaning
Warning!
Do not use the device in any of the following cases.
• the warming surface is damaged (e.g. dents, cracks)
• the warming surface is wet (e.g. leaked IV fluids/blood, cleaning agents)
• the warming surface is dirty (e.g. coagulated blood)
Clean or dry the surface or take the device out of service if necessary.