Smart Backfeed
When in stripper or cut mode, a label is printed and moved forward to be cut
or peeled off. If Smart Backfeed is ON, the next label will be partially printed
so the printer does not have to backfeed to find the original starting point
when printing continues.
On:
Turns smart backfeed on
Off:
Turns smart backfeed off. (default)
Printhead position
Defines the location of the print image on the label.
Range is –100 to +100 (hundredths of inches) (-.254mm - .254mm)
Positive values cause the print image to be moved to the trailing edge of the
label.
Password
On:
Allows user to set a password to restrict setup changes.
Off:
Allows any user to change setup selections. (default).
Preview
Selecting “Preview” allows the user to browse the current configuration
settings on the LCD. Pressing the Feed Key will allow the user to scroll
through the list of configuration options.
- 13 -
