TGW NBS 90 PolySort, Инструкция по установке, эксплуатации и обслуживанию

Страница: 52 / 83

NBS®90 PolySort & SP IOM
P/N: 1193974 Revision Date: 4/25/2019 Page 52 of 83
8.16: NBS B
ELT
S
PECIFICATIONS AND
L
ACING
• PVC 200 belt
• Width: 15/16" + /- 1/32"
• Thickness: .203" +/- .015 thick, with a recessed
• Thickness at recess: .125" to .156"
•
Lace: Clipper P/N 05265 U2S12 (tote); minimum number of
hooks = 5 on one end, 6 on other end.
•
Lacing Pin: Nylostainless
•
.093 dia. x 7/8” +/- 1/32” long (316 stainless steel w/nylon coating); clipper P/N 02670
•
For field repair chamfer belt corners, no more than 1/8”.
8.16.1: NBS-90 PolySort Belt Replacement
Replacement belts may be ordered by the original "P/N" part number marked on the belt or belt length
can be determined by the following information.
• 2’-9’ drive bed = 5’ 11”-1/4” (71.25”)
• 5’0” Drive bed with take-up = 5’11-1/4” (71.25”)
• 1’6” End Pulley = 2’11”-3/8” (35.38”)
•
4’0” End Pulley with take-up = 8’3” (99”)
•
NBS90 PolySort transfers require 0" each
•
Take-up = 3-5/8” (3.625”)
•
All other beds require 2 times their overall length.
NOMINAL WIDTHS (# OF BELTS)
•
26.5BF with 9 belts on 2 1/2” centers
8.16.2: NBS-90 SP Belt Replacement
Replacement belts may be ordered by the original "P/N" part
number marked on the belt or belt length can be determined by the
following information.
•
2’-9’ drive bed = 5’ 11”-1/4” (71.25”)
•
1’6” End Pulley = 2’11”-3/8” (35.38”)
•
NBS90 SP transfers require 0" each
•
Take-up = 3-5/8” (3.625”)
•
All other beds require 2 times their overall length.
NOMINAL WIDTHS (# OF BELTS)
•
11.25 NBS SP = 3 belts
•
14 NBS SP = 4 belts
•
Only use the specified lacing and pin. Any substitution will result in premature belt failure.
CAUTION