TGW NBS 90 PolySort, Инструкция по установке, эксплуатации и обслуживанию

Страница: 67 / 83

NBS®90 PolySort & SP IOM
P/N: 1193974 Revision Date: 4/25/2019 Page 67 of 83
Monthly
• Check air filters for cleanliness.
•
Clean chains and sprockets and lubricate with SAE 30 weight oil or equivalent. (Check
chain tension and tightness of all adjusting screws.)
•
Check drive unit for leaking seals and oil level in gearcase (if applicable), unusual noises,
vibration and stress cracks.
Semi-Yearly
•
If dry sounding, lubricate unsealed bearings in rollers with light oil. Check free spin of
rollers.
•
Drain and flush gearcase after each 2,500 hours of normal operation or at least every 6
months (if applicable).
•
Grease motor shaft bearings.
•
Inspect and clean motor control centers.
•
Grease regreasable bearings.
Yearly
•
Change oil in gearboxes.
•
Inspect tightness of all nuts and bolts on units. Readjust and, if necessary, retighten.
• Check for plumb and level. Shims have been known to vibrate out from under supports in
isolated incidents.
• Touch up paint that has been chipped. Unpainted surfaces will rust.
• Inspect for stress/fatigue cracks in frame and supports.
•
Check to confirm tools and foreign objects have not been left
on or inside the conveyor.
•
Check to confirm all loosened parts have been retightened.
•
Check to confirm all guards have been installed.
WARNING