TFS NTP80plus, Справочное руководство

Страница: 31 / 57

MANUAL P/N 900000165 REV H
31
6 Front Panel Setup & Status.
With the NTP80plus switched on and connected to a GPS signal a typical status display would
show:
GPS Tue Nov 27 16:29:38 2012
9 GPS 5 ST: Normal
This indicates that the unit has time from GPS and that the GPS signal is normal. The second
row indicates the number of visible satellites as the first number on the left followed by the
tracked satellites in the selected constellations. In this case just GPS is selected. The selection
will be shown on the top line.
GPS+GLONASS Tue Nov 27 16:29:38 2012
9 GPS 5 GLO 3 ST: Normal
The configuration menu structure is (left of | shows down path, right for up path)
Main
-------------OK---------------------
|^ |^
< Date/Time > < Ethernet >
OK| OK|
Edit Date/time -------------------------------------------------------
(if permitted) |^ |^ |^
< ETH1 > < ETH2 > < ETH3 >
OK|^ OK|^ OK|^
ETH1 display ETH2 display ETH3 display
OK|OK(save) OK|OK(save) OK|OK(save)
Edit ETH1 Edit ETH2 Edit ETH3
So to configure the Ethernet ports from the front panel follow the sequence below, using the
keys up, down, left, right and OK.
From the main display (show above) press OK
Main > Date/Time
[OK-enter] ->