Product part no. 830049 Advantage
DC
Dual Zone Fire Control Panel
Manual part no 650.830049 rev. June 13, 2022
Annual Battery Replacement
At least annually, the backup battery should be replaced. Dispose of the battery as
described in section 2 of this manual and in accordance with local regulations.
•
Disable the Actuators by flipping the Actuation toggle switch to OFF.
•
Remove power to the panel and unplug both Primary and Secondary power
connectors from the Advantage panel. Remove two #6 screws on either side
of the battery bracket. Unplug the 9 vdc battery and replace with a new battery.
Record the installation date on the battery replacement label.
•
Reassemble the two #6 screws to the battery bracket. Plug the primary and
secondary power connectors into the Advantage panel. The connectors are
identified by colored ty-wraps. Red for primary 24 VDC input and black for
secondary battery backup input.
•
Restore power to the Advantage panel.
•
Enable the Actuators by flipping the Actuation toggle switch to ON
Figure 11 - Part no. 830053 NiMH Replacement Battery
Figure 10 - Backup battery replacement
