TFA 14.1513.01, Инструкция по эксплуатации

Страница: 9 / 26

16 17
Getting started
Inserting the batteries in the thermometer
y
Remove the protective film from the display.
y Open the battery compartment (Fig.1-B) on the back of the thermometer
and insert two new batteries 1.5 V AAA. Make sure the polarities are correct.
Close the battery compartment. The device will alert you with a beep, all LCD
segments will be displayed and the backlight will turn on for a short moment.
The device is ready for use.
y The current temperature, the cooking chamber symbol (Fig.5-H) and the
battery symbol (Fig.5-B) appear on the display.
Connect the probes
y
Pull off the rubber protection cover (Fig.1-C) carefully from the opening of the
first probe on the left side of the thermometer. Plug the probe cable connector
(Fig.3-K) into the jack (Fig.3-J).
y Repeat the process for the second probe.
y
The display now alternately shows the current temperatures measured by the
cooking chamber sensor, the insertion probe 1 and 2 (Fig.5-G).
y You can also operate the device with only one or without probe.
Mounting the thermometer on the barbecue lid (Fig.4)
y
Make sure your barbecue has a double-walled lid, otherwise heat can
damage the thermometer.
y
The pre-drilled hole must have a diameter of 9 to 14 mm and a
depth of 6 to 27 mm.
y Put the heat insulation plate (Fig.2-E) on the hole. The flat, longer side facing
up. Now put the shaft through the hole and fix the thermometer on the back of
the lid with the washer (Fig.2-F) and the screw nut (Fig.2-G).
Switch the devices off and on
y Press and hold the control button (Fig.1-A) for three seconds.
y
The device is switched off.
y Press and hold the control button to turn the device back on.
IMPORTANT : To increase the life of the batteries, switch off the device after each use!
Download the app
y
Download the free HyperBBQ app from the “Apple App Store” or “Google Play
Store”.
y Make sure your mobile phone meets the following requirements:
Compatible with iPhone 4S (or later), iPod touch 5th generation (or later),
iPad 3rd generation (or later), iPad mini
Android™ Smartphone 4.3 (or later).
Connect to the mobile device
y Start the app and follow the instructions on the screen to establish connection.
y
Hold down the control button (Fig.1-A) for 3 seconds and switch on the
thermometer.
y Briefly press the control button to pair.
y
You do not have to repeat the pairing process for other applications unless you
switch to another mobile device.
Google Play and the Google Play logo are trademarks of Google LLC. Android is a trademark of Google LLC.
Apple, Apple Watch, iPad, iPod, iPod touch, and iPhone, are trademarks of Apple Inc., registered in the U.S. and other coun-
tries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered
trademark of Cisco in the U.S. and other countries and is used under license.
HyperBBQ App (Fig.6)
The app ‘s appearance can differ between iOS and Android™ and may change after an
update. Please always follow the current instructions in the app.
Fig.6-A - Options
Fig.6-B - Connection status
Fig.6-C - Duration
Fig.6-D - Timer
Fig.6-E - Photo function
Fig.6-F - Current temperature probe 1
Fig.6-G - Probe 1 and 2 with selected
colour marking
Fig.6-H - Selected dish with
target temperature
Fig.6-J - Current temperature
cooking chamber
Fig.6-K
- Cooking chamber sensor with
selected colour marking
Fig.6-L - Selected dish with lower/upper
temperature limit
Fig.6-M - Battery symbol for
the thermometer
Fig.6-N - Device settings