Textron Bell 412, Руководство по обслуживанию

Страница: 75 / 288

BHT-412-MM-2
5-00-00
26 FEB 2013 Rev. 16 Page 43 Export Classification C, ECCN EAR99
Every sixth 100 hour inspection (600 hours) or 12 months:
1. Inspect collective flight controls:
a. Flight control systems bellcrank and control tubes for
damage, chafing, corrosion, and security of attachment.
b. Friction shoes and liners for condition.
c. Check collective lever friction adjuster for operation.
d. Check for proper collective minimum friction.
e. Check collective flight controls for smooth movement
throughout full range of travel.
2. Inspect flight controls:
a. Flight control systems bellcrank and control tubes for
damage, chafing, corrosion, and security of attachment.
b. Check cyclic stick friction adjuster for proper operation.
c. Check for proper cyclic minimum friction.
d. Check cyclic flight controls for smooth movement
throughout full range of travel.
3. Inspect anti-torque flight controls:
a. Flight control systems bellcrank and control tubes for
damage, chafing, corrosion, and security of attachment.
b. Check anti-torque friction adjuster for proper friction.
c. Check anti-torque flight controls for smooth movement
throughout full range of travel.
4. Aerodynamically actuated elevator:
a. Remove left and right elevators.
b. Clean elevator spars and inspect for corrosion.
SCHEDULED INSPECTIONS
5-6. 100 HOUR/12 MONTH INSPECTION — PART A (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER