en-48
7
OPERATION
3.
Each successive pass should overlap the previous one by two or three inches (51 or 76mm) (a painted
mark two or three inches (51 or 76mm) in from the outer edges of the two front grass catchers will help
align each overlapping pass).
4.
After all of the straight passes have been made, make one final pass around the outer edge of the green.
This final pass should always be in the opposite direction from the last time the green was mowed.
5.
With the engine stopped or the reel enable switch in the "OFF" position, empty the grass catchers before
proceeding to the next green.
NOTE: To avoid damage to the green, NEVER stop the forward motion of the mower on the green with
the reels turning. Stopping the mower on a wet green may cause wheel indentations.
7.12
TO STOP THE ENGINE ________________________________________________
1.
Disengage drive to the cutting units with the cutting unit switch.
2.
Return the FWD/REV pedal to the neutral position.
3.
Set the parking brake.
4.
Move the throttle control lever to the SLOW position.
5.
Turn the ignition key to OFF.
7.13
HOW TO REMOVE A BLOCKAGE FROM CUTTING UNITS ___________________
1)
Disengage the power to the cutting units with the cutting unit switch.
2)
Keep the cutting units lowered to the ground (Wait for the remaining cutting cylinders to stop rotation).
3)
Lift the cutting units into the “Transport Position”, lock in position use the transport latches fitted on your
product.
4)
Remove your foot from the forward/reverse pedal.
5)
Set the parking brake.
6)
Move the throttle control lever to the slow position.
7)
Turn the ignition key to the off position and remove the key.
CAUTION
It is important to note: there will be remaining hydraulic pressure within the system that can cause the cutting
cylinder to rotate when the obstruction is removed. Therefore keep your hands, feet and clothing away from
cutting units at all times.
NOTE
Make sure correctly selected PPE is worn before you clear the obstruction.
Содержание 62706
