Textron 62706, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 34 / 108

en-34
6 CONTROLS
6.2A STARTER KEY SWITCH _______________________________________________
The key switch has three positions:
OFF - prevents all electrical functions from operating.
Switch must be in the OFF position to remove the key.
ON - Illuminates the red indicator lamp. This position is
also for normal operation.
START - Activates the glow plugs & automatically cranks
the engine after the glow plugs have pre-heated. Release
the key after engine starts (the switch automatically
returns to ON).
NOTE
If the engine fails to start, or if it “dies” for any reason, the ignition switch must be returned to the OFF position
before restarting is attempted. This feature prevents damage to the starter and flywheel teeth that can occur if
the starter is engaged while the engine is running. Wait 30 seconds before restarting engine.
6.2B THROTTLE CONTROL LEVER __________________________________________
The lever should be moved towards the front of the
machine to increase the engine speed and towards the rear
of the machine to decrease the engine speed.
NOTE: Engine should be used at full speed
6.2C CUTTING UNIT SWITCH (PTO) __________________________________________
Colour Yellow.
To commence cutting ensure mow / transport lever is in
mow position and the units have been lowered.
Push bottom of the rocker switch and move joystick
towards the lower position.
To stop cutting unit rotation push top of rocker switch.
Cutting units stop rotating automatically when raised or the
operator leaves the seat.